Product Description
Airdog Fuel Systems
2008-2010 FORD POWERSTROKE TURBO DIESEL 6.4L
Part# A4SPBF073
Original Airdog System FP-150
Preset at 10 psi
Features:
- Removes Air and Vapor from Diesel Fuel
- Pure Diesel Fuel Reaching Engine
- High Flow Rates of Fuel to Engine
- Longer Injector Life
- Increased Injection Pump Life
- Increased Fuel Economy
- Optimized Engine Performance
- Increased Torque Output
- Improves Throttle Response
- Small & Compact:Only 7L X 10T X 3.2W
- Single Piece Pump Body:Replaces the old 3 piece pump design reducing the number of parts, unit size, and weight. This results in a sleek, low profile pump assembly and eliminates the need for leaky, messy gaskets!
- Mounts To Frame:No Drilling Required!
Description:
The AirDog Fuel Preporator, with the capability to provide fuel at flows and pressures beyond the maximum requirements of the engine, receives fuel under vacuum from AirDog - The Original Fuel/Air Separation Systemthe fuel tank containing entrained air/vapor, particulate contaminates and unknown quantities of moisture. The fuel passes through the water separator which removes the water and large particulate contaminates that could damage or jam the gerator fuel pump. The fuel, with only entrained air/vapor and tiny particulate contaminates remaining, enters the fuel pump.
The fuel, now under positive pressure flow, enters the filter. As the fuel passes through the filter media and the remaining particulate contaminates are caught and contained, the entrained air/vapor is also separated. Through the positive fuel air separation features of the patented Fuel Preporator the separated air/vapor is discharged from the filter through the Primary Air/Vapor Discharge Port and into the return to tank passage after the regulator. The fuel passing through the filter media (free of contaminates & power robbing air/vapor and at pressures and flows to meet the needs of the engine exits the fuel filter through two passageways. The fuel for the engine, passes into the fuel pickup tube and out to the engine).
The excess fuel not needed by the engine is released through the pressure regulator to combine with the air/vapor and foam as it returns to the fuel tank. The regulator controls the fuel pressure to the engine.
This is the AirDog I FP-150 fuel system for the 1999-2003 Ford Powerstroke 7.3L. This is a low pressure (10psi) system feeds the factory frame rail pump, only, and does not replace it. If you are looking to replace the factory fuel pump, you will need kit A6SABF492 which is an AirDog II-4G DF-165 set at 55-60psi. This system mounts to the frame rail using the supplied sandwich plate mounting system. Fuel is picked up through a 1/2" draw straw to feed the AirDog. The pressure side connects directly to the factory frame rail fuel pump. The AirDog Air/Vapor return is sent back to the tank through a filler neck tee. This is a 150GPH (Gallon Per Hour) fuel system. Check out our installation manual for a list of parts that are included with this kit.
AirDog Installation Kit:
- Relay Control Wiring Harness
- 1/2' Suction Tube (when required)
- All Fuel Fittings Required
- Mounting Hardware
- 1/2' Fuel Lines W/ OEM Style Quick Connect Fittings
- AirDog Bracket & Spacer
- Plastic Ties
- Installation Manual
Warranty Information:
Warranty must be registered for through Air-Dog. For information about warranty registration process or questions. Contact Airdog through their website, phone, or email.
